Circuit Documentation
Summary of the Circuit
This circuit appears to be designed for measuring acceleration along three axes using the AITrip ADXL335 GY-61 accelerometer module. The power is supplied by a 3xAA battery pack. The measured signals from the accelerometer are intended to be observed using an oscilloscope. There is no microcontroller or embedded code involved in this circuit.
Component List
Oscilloscope
- Description: An oscilloscope is an electronic test instrument that allows observation of constantly varying signal voltages, typically as a two-dimensional plot of one or more signals as a function of time.
- Purpose: In this circuit, the oscilloscope is used to display the output signals from the accelerometer.
AITrip ADXL335 GY-61
- Description: The AITrip ADXL335 GY-61 is a small, thin, low power, complete 3-axis accelerometer with signal conditioned voltage outputs.
- Purpose: It measures acceleration with a minimum full-scale range of ±3 g. It can measure the static acceleration of gravity in tilt-sensing applications, as well as dynamic acceleration resulting from motion, shock, or vibration.
- Pins: GND, Z-Out, Y-Out, X-Out, VCC
3xAA Battery
- Description: A battery pack consisting of three AA batteries connected in series.
- Purpose: Provides the power supply for the accelerometer.
- Pins: VCC, GND
Wiring Details
Oscilloscope
- Connections:
- The ground (GND) is shared with the 3xAA battery and the AITrip ADXL335 GY-61 accelerometer.
AITrip ADXL335 GY-61
- Connections:
- GND: Connected to the ground of the 3xAA battery pack.
- VCC: Connected to the VCC of the 3xAA battery pack.
- Z-Out: Connected to the oscilloscope for monitoring the Z-axis acceleration.
- Y-Out: No connection specified.
- X-Out: No connection specified.
3xAA Battery
- Connections:
- VCC: Provides power to the VCC pin of the AITrip ADXL335 GY-61 accelerometer.
- GND: Common ground shared with the AITrip ADXL335 GY-61 accelerometer and the oscilloscope.
Documented Code
There is no embedded code provided for this circuit as there are no microcontroller components involved. The circuit functions purely as an analog signal generator from the accelerometer to be observed on the oscilloscope.