Cirkit Designer
Your all-in-one circuit design IDE
Home /
Component Documentation
How to Use 2HP Well Pump: Examples, Pinouts, and Specs
Design with 2HP Well Pump in Cirkit DesignerIntroduction
The Everbilt HDEFLS205 is a robust 2HP well pump designed for efficient water extraction from wells, boreholes, or reservoirs. This submersible pump is commonly used in residential, commercial, and agricultural settings where reliable and high-capacity water delivery is essential. Its 2 horsepower motor ensures a consistent flow rate, making it suitable for irrigation, water supply systems, and pressure boosting applications.
Explore Projects Built with 2HP Well Pump
Dual DC Motor Control Circuit with Speed Regulation and Indicator Lamp
This circuit includes a 12V 200Ah battery that powers a water pump and two DC motors, each controlled by a separate 12v~40v 10A PWM DC motor speed controller. A rocker switch (SPST) is used to control the power flow to the water pump and a pilot lamp indicates when the pump is powered. The DC motors' speed can be adjusted by the PWM controllers, and wire connectors are used to organize the connections between components.
Open Project in Cirkit DesignerDual Mini Diaphragm Water Pump System with Rocker Switch Control
This circuit consists of two Mini Diaphragm Water Pumps connected in parallel to a 12v 7ah Battery through a Rocker Switch. The switch controls the power supply to both pumps, allowing them to be turned on or off simultaneously. The circuit is designed to pump water from a tank through nozzles when activated.
Open Project in Cirkit DesignerArduino Mega 2560-Based Smart Water Pump System with Bluetooth Control
This circuit is a remotely controlled water pump system using an Arduino Mega 2560. The Arduino controls a 4-channel relay module to switch the water pump on and off, based on input from a rotary potentiometer and commands received via a Bluetooth HC-06 module. The system is powered by a 12V power supply.
Open Project in Cirkit DesignerWi-Fi Controlled Irrigation and Well Pump System
This circuit is designed to automate irrigation and well pump control using a Wemos D1 Mini microcontroller. It includes a 4-channel 5V relay module for controlling 24V irrigation valves and a separate relay for a 220V well pump, with power supplied by a 5V power supply and a 220V to 24V transformer.
Open Project in Cirkit DesignerExplore Projects Built with 2HP Well Pump
Dual DC Motor Control Circuit with Speed Regulation and Indicator Lamp
This circuit includes a 12V 200Ah battery that powers a water pump and two DC motors, each controlled by a separate 12v~40v 10A PWM DC motor speed controller. A rocker switch (SPST) is used to control the power flow to the water pump and a pilot lamp indicates when the pump is powered. The DC motors' speed can be adjusted by the PWM controllers, and wire connectors are used to organize the connections between components.
Open Project in Cirkit DesignerDual Mini Diaphragm Water Pump System with Rocker Switch Control
This circuit consists of two Mini Diaphragm Water Pumps connected in parallel to a 12v 7ah Battery through a Rocker Switch. The switch controls the power supply to both pumps, allowing them to be turned on or off simultaneously. The circuit is designed to pump water from a tank through nozzles when activated.
Open Project in Cirkit DesignerArduino Mega 2560-Based Smart Water Pump System with Bluetooth Control
This circuit is a remotely controlled water pump system using an Arduino Mega 2560. The Arduino controls a 4-channel relay module to switch the water pump on and off, based on input from a rotary potentiometer and commands received via a Bluetooth HC-06 module. The system is powered by a 12V power supply.
Open Project in Cirkit DesignerWi-Fi Controlled Irrigation and Well Pump System
This circuit is designed to automate irrigation and well pump control using a Wemos D1 Mini microcontroller. It includes a 4-channel 5V relay module for controlling 24V irrigation valves and a separate relay for a 220V well pump, with power supplied by a 5V power supply and a 220V to 24V transformer.
Open Project in Cirkit DesignerTechnical Specifications
General Specifications
- Manufacturer: Everbilt
- Part ID: HDEFLS205
- Type: Submersible Well Pump
- Power Rating: 2 Horsepower (HP)
- Supply Voltage: 230V AC, Single Phase
- Maximum Flow Rate: [Insert flow rate] gallons per minute (GPM)
- Maximum Head Lift: [Insert head lift] feet
- Outlet Diameter: [Insert diameter] inches
- Optimal Well Diameter: [Insert diameter] inches or larger
- Cable Length: [Insert length] feet
Pin Configuration and Descriptions
| Pin Number | Description | Notes |
|---|---|---|
| 1 | L1 (Line 1) | Connect to phase of power supply |
| 2 | L2 (Line 2) | Connect to phase of power supply |
| 3 | Ground | Connect to earth ground |
Note: The pump requires a dedicated 230V AC circuit and should be installed by a qualified electrician or technician.
Usage Instructions
Installation
- Safety First: Ensure the power supply is turned off before installation.
- Prepare the Well: Verify that the well is free of debris and the diameter is suitable for the pump.
- Electrical Connections: Connect L1 and L2 to the power supply lines, ensuring proper voltage and phase orientation. Connect the ground pin to the earth ground.
- Pump Placement: Carefully lower the pump into the well, avoiding any twisting or damage to the power cable.
- Testing: Once installed, turn on the power supply briefly to test the pump operation. Check for normal sounds and water flow.
Best Practices
- Use a torque arrestor to prevent the pump from spinning in the well.
- Install a check valve above the pump to prevent backflow and protect the pump from water hammer.
- Ensure the electrical connections are waterproof and secure.
- Regularly inspect the pump and electrical components for wear or damage.
Troubleshooting and FAQs
Common Issues
- Pump Does Not Start:
- Check the power supply and circuit breaker.
- Verify that the electrical connections are secure and correct.
- Low Water Output:
- Inspect for clogs in the pump or piping.
- Check if the well water level is too low for the pump's intake.
- Pump is Noisy or Vibrates Excessively:
- Ensure the pump is properly aligned in the well.
- Check for worn bearings or damaged components.
FAQs
Q: Can the Everbilt HDEFLS205 be used in a well with a diameter smaller than recommended? A: It is not recommended as it may restrict the pump's operation and reduce its lifespan.
Q: How often should the pump be serviced? A: It depends on usage, but an annual inspection is typically recommended.
Q: Is a pressure tank required with this pump? A: Yes, a pressure tank helps to maintain consistent water pressure and reduces the frequency of pump cycling.
Note: This documentation is for informational purposes only. Always consult the manufacturer's manual and a professional for installation and maintenance.
Disclaimer: The information provided in this documentation is based on general specifications for a 2HP well pump and may not represent the exact details for the Everbilt HDEFLS205. Always refer to the specific manufacturer's documentation for accurate information.