Cirkit Designer
Your all-in-one circuit design IDE
Home /
Component Documentation
How to Use TP-LINK TL-SG3428XMP 24 port Network Switch: Examples, Pinouts, and Specs
Design with TP-LINK TL-SG3428XMP 24 port Network Switch in Cirkit DesignerIntroduction
The TP-LINK TL-SG3428XMP is a high-performance, managed network switch designed for enterprise-level networking solutions. It features 24 Gigabit Ethernet ports that support Power over Ethernet (PoE) for flexible deployment of wireless access points, IP cameras, and VoIP phones. This switch is ideal for small to medium-sized business networks that require efficient network management, advanced security features, and reliable performance.
Explore Projects Built with TP-LINK TL-SG3428XMP 24 port Network Switch
Optiplex Micro and PoE Camera Surveillance System with Ethernet Switching
This circuit describes a networked system where an Optiplex Micro computer is powered by a PC Power Supply and connected to a PC Screen via HDMI for display output. The computer is networked through an Ethernet Switch, which also connects to two PoE Cameras and a Toyopuc PLC. The Ethernet Switch is powered by a PoE PSU 48V DC, and all AC-powered devices are connected to a common 220V AC source.
Open Project in Cirkit DesignerESP32 and W5500 Ethernet Module Controlled 8-Channel Relay
This circuit enables Ethernet connectivity and device control through an ESP32 microcontroller. It uses the W5500 Ethernet module for network communication and controls an 8-channel relay module for switching external devices or loads.
Open Project in Cirkit DesignerModular Power Distribution System with Multiple SMPS Units and 120V Outlet
This circuit is designed to convert 240V AC power to both 12V and 24V DC outputs using multiple SMPS units. Terminal blocks are used to organize and distribute the power, while a 120V outlet provides additional AC power access. The circuit is likely used for powering various electronic devices that require different voltage levels.
Open Project in Cirkit DesignerToggle Switch Controlled Lamp Circuit with Banana Sockets
This circuit consists of two toggle switches and a red lamp connected to panel mount banana sockets. The switches control the connection between the red and black banana sockets, allowing the lamp to be turned on or off depending on the switch positions.
Open Project in Cirkit DesignerExplore Projects Built with TP-LINK TL-SG3428XMP 24 port Network Switch
Optiplex Micro and PoE Camera Surveillance System with Ethernet Switching
This circuit describes a networked system where an Optiplex Micro computer is powered by a PC Power Supply and connected to a PC Screen via HDMI for display output. The computer is networked through an Ethernet Switch, which also connects to two PoE Cameras and a Toyopuc PLC. The Ethernet Switch is powered by a PoE PSU 48V DC, and all AC-powered devices are connected to a common 220V AC source.
Open Project in Cirkit DesignerESP32 and W5500 Ethernet Module Controlled 8-Channel Relay
This circuit enables Ethernet connectivity and device control through an ESP32 microcontroller. It uses the W5500 Ethernet module for network communication and controls an 8-channel relay module for switching external devices or loads.
Open Project in Cirkit DesignerModular Power Distribution System with Multiple SMPS Units and 120V Outlet
This circuit is designed to convert 240V AC power to both 12V and 24V DC outputs using multiple SMPS units. Terminal blocks are used to organize and distribute the power, while a 120V outlet provides additional AC power access. The circuit is likely used for powering various electronic devices that require different voltage levels.
Open Project in Cirkit DesignerToggle Switch Controlled Lamp Circuit with Banana Sockets
This circuit consists of two toggle switches and a red lamp connected to panel mount banana sockets. The switches control the connection between the red and black banana sockets, allowing the lamp to be turned on or off depending on the switch positions.
Open Project in Cirkit DesignerCommon Applications and Use Cases
- Small to medium-sized business LANs
- IP surveillance systems
- Wireless network deployments with PoE access points
- VoIP phone systems
- Networked office environments
Technical Specifications
Key Technical Details
- Switching Capacity: 56 Gbps
- Forwarding Rate: 41.7 Mpps
- PoE Budget: 384W total PoE power budget, up to 30W per port
- MAC Address Table: 8K entries
- Jumbo Frame: 9KB
- Standards and Protocols: IEEE 802.3af/at (PoE), IEEE 802.1Q (VLAN), IEEE 802.1p (CoS/DSCP priority)
Pin Configuration and Descriptions
| Port Number | Description | PoE Support | Data Rate |
|---|---|---|---|
| 1-24 | Gigabit Ethernet Ports | IEEE 802.3af/at | 10/100/1000 Mbps |
| 25-28 | SFP+ Slots (Fiber Uplinks) | N/A | 1/10 Gbps |
Usage Instructions
How to Use the Component in a Circuit
- Installation: Mount the switch in a rack or place it on a stable surface.
- Power Connection: Connect the power cord to the switch and plug it into an appropriate power outlet.
- Connecting Devices:
- Connect Ethernet cables from the devices you wish to network into the Gigabit Ethernet ports on the switch.
- For PoE devices, ensure they are connected to the ports that support PoE.
- For high-speed uplink or stacking, use the SFP+ slots with compatible modules and cables.
Important Considerations and Best Practices
- Ensure adequate ventilation around the switch to prevent overheating.
- Do not exceed the total PoE power budget when connecting PoE devices.
- Regularly update the firmware to the latest version for improved security and performance.
- Configure VLANs and network segmentation for better traffic management and security.
- Use quality cables and connectors to avoid signal degradation and ensure reliable connectivity.
Troubleshooting and FAQs
Common Issues Users Might Face
- Power Issues: Ensure the power source is reliable and the power cord is securely connected.
- Connectivity Issues: Check the cable connections and the status LEDs for proper operation.
- PoE Not Working: Verify that the connected device is PoE-compatible and that the switch's PoE budget is not exceeded.
Solutions and Tips for Troubleshooting
- Resetting the Switch: If the switch is not responding, try performing a hardware reset.
- Checking Port LEDs: The LEDs can provide information about the status of each port and help identify issues.
- Firmware Updates: Keep the switch's firmware up to date to resolve known issues and improve functionality.
FAQs
Q: How do I manage the switch? A: The switch can be managed via the web-based management interface, CLI (Command Line Interface), SNMP (Simple Network Management Protocol), or through the TP-Link Omada SDN platform.
Q: Can I use all ports for PoE at the same time? A: Yes, as long as the total power consumption does not exceed the switch's PoE power budget.
Q: What is the warranty period for the TP-LINK TL-SG3428XMP? A: The warranty period may vary by region. Please check with TP-Link or your local distributor for the specific warranty terms.
Q: How do I set up VLANs on this switch? A: VLANs can be configured through the web management interface or CLI. Refer to the user manual for detailed instructions.
Note: This documentation is for informational purposes only. For detailed installation and configuration, always refer to the official TP-Link user manual and support resources.